
Fish Hawk Cabinet Refacing
Crown Molding Addition in Fish Hawk, FL
Crown molding addition in Fish Hawk, FL. Decorative molding fitted to the top of your existing cabinets. Free estimates available.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Fish Hawk and nearby communities.
Crown molding addition adds decorative trim along the top of your existing cabinets, closing the gap to the ceiling and giving a finished, custom look. It can be added on its own to cabinets you already have, or bundled in with a refacing project if you're doing both at once.
Fish Hawk Cabinet Refacing measures the exact run and angles needed before cutting, so corners fit tight and the molding reads as a natural part of the cabinetry rather than an obvious add-on.
What's included
What's included with Crown Molding Addition
Typically included: measurement of cabinet tops and corner angles, molding profile selection, precise cutting and fitting, secure attachment, and finish touch-ups to blend seams.
Optional: corner molding blocks for complex angles, and matched stain or paint to tie the molding into your existing cabinet finish.
Customer prep: clear countertops near the cabinets so the crew has room to work and measure accurately.
Want a clearer scope?
Get a Free EstimateHow it works
How our Crown Molding Addition process works
Step 1Space Measurement
Cabinet tops are measured to determine molding length and angles needed.
Step 2Molding Style Selection
Clients choose molding profiles that complement their cabinet design.
Step 3Cutting and Fitting
Molding pieces are cut to precise angles for proper corner fitting.
Step 4Surface Preparation
Cabinet tops are prepared to ensure secure molding attachment.
Step 5Molding Installation
Molding is attached and secured along the tops of cabinet runs.
Step 6Finish Touch-Ups
Seams and edges are finished to blend molding with existing cabinetry.
Materials
Materials and methods for Crown Molding Addition
Molding addition is a finishing touch, so the material choices here are about matching your existing cabinet finish and handling tricky ceiling-height gaps cleanly.

Crown Molding Profiles
a range of molding profiles add decorative detail above cabinetry, from simple to more ornate depending on your kitchen's style.

Wood Molding Strips
solid wood strips provide a traditional, durable molding option that takes stain or paint well to match existing cabinets.

Molding Adhesive
strong adhesive secures molding firmly to cabinet surfaces, which matters in humid Florida kitchens where material shifts slightly with seasons.

Finish Nails
finish nails provide additional support for molding installation beyond adhesive alone, especially on longer runs.

Matching Stain or Paint
finish is matched to existing cabinetry so the new molding doesn't stand out as an obvious later addition.

Corner Molding Blocks
corner blocks simplify fitting at complex cabinet angles, common in kitchens with an island or an L-shaped cabinet run.
Questions on materials?
Get a Free EstimateTimeline
How long does crown molding addition take?
Molding is a quick add-on project, often finished in a single visit once the profile is selected.
- 01
Measurement and profile selection
same day - 02
Material order
1 week - 03
Cutting and install
1 day - 04
Finish touch-ups
same day
Need a schedule that fits?
Get a Free EstimateCost
What does crown molding addition cost in Fish Hawk?
Molding is priced by linear foot, making it one of the more affordable finishing touches available. Call (863) 277-6503 for a free estimate on your cabinet layout.
| Project type | Typical range | What’s included |
|---|---|---|
| Basic molding, standard profile | $400–$900 | straightforward kitchen with simple corners. |
| Decorative molding profile | $800–$1,800 | more ornate profile with added detail. |
| Molding with corner block detailing | $1,000–$2,200 | complex layouts with multiple corners. |
| Full kitchen crown molding package | $1,500–$3,500 | all cabinet runs including island if applicable. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateDIY vs pro
DIY vs hiring a pro for Crown Molding Addition
| DIY | Hire a pro |
|---|---|
| Simple straight runs without corners are a reasonable DIY project for someone comfortable with a miter saw | Uneven ceilings and cabinet tops are common in real homes, and getting a clean fit against an uneven surface takes experience most DIYers don't have |
| Pre-primed molding simplifies painting for a DIY finish | Corner miters have to be cut at compound angles to close tight, which is where most DIY molding jobs show visible gaps |
| Fine for a small accent cabinet where a slightly imperfect seam isn't highly visible | Matching stain or paint sheen to existing cabinets across a full kitchen run is harder to get consistent without professional finishing tools |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to call for Crown Molding Addition
Call (863) 277-6503 for a free estimate on crown molding.
- Cabinets stop flat at the top and look unfinished against the ceiling
- There's a visible gap between cabinet tops and the ceiling you want closed
- You're adding a finishing detail as part of a broader refacing project
- You want a more custom, built-in look without replacing the cabinets
Seeing warning signs?
Get a Free EstimateFAQs
Crown Molding Addition FAQs
Is it worth it to add crown molding during a refacing project?
Adding molding while cabinets are already being worked on is efficient since the crew is already on site and finish matching happens in the same visit.
How much does crown molding cost per linear foot?
Pricing generally depends on profile complexity, with basic profiles costing less than more ornate or detailed options, totaling roughly $400 to $3,500 for a typical kitchen depending on scope.
Do I need a permit to add crown molding to cabinets?
Crown molding addition is cosmetic trim work and doesn't require a permit in Hillsborough County.
How long does it take to install crown molding on cabinets?
Most installations are completed in a single day once the molding profile is selected and materials are on hand.
Can crown molding be added to cabinets that weren't designed for it?
With the right profile and corner blocks, molding can be fitted to most existing cabinet tops even if they weren't originally designed with molding in mind.
More services
Other Cabinet Refacing services

Cabinet Refacing
Cabinet refacing in Fish Hawk, FL swaps doors, drawer fronts, and veneer over your existing boxes. Free estimates, no gut remodel.

Kitchen Cabinet Refacing
Kitchen cabinet refacing in Fish Hawk, FL updates every box, door, and drawer front in your kitchen. Free estimates, no full remodel.

Bathroom Vanity Refacing
Bathroom vanity refacing in Fish Hawk, FL. New doors, moisture-resistant finishes, and hardware over your existing vanity box. Free estimates.
Ask about Crown Molding Addition
Tell us about the project and how to reach you.